Tips About Electric Fishing Trolling Outboard
Electric fishing trolling outboard are being found more and more often onboard many fishing boats. Boaters are discovering the many benefits electric fishing trolling outboard have to offer. Most notable the fact they operate in silence and that they are environmentally friendly. In addition, their popularity is not hurt by the rise in gas prices. These motors do require care that is different from the average gasoline powered motors.
Electric fishing trolling outboard operate differently than gas motors, so it is no surprise that they need different care. Electric fishing trolling outboard use batteries to supply them with power. This means they have a whole different way of powering up. Any fisherman that has or is buying an electric fishing trolling outboard needs to check out the follow list of tips.
- Charging replaces filling with fuel. It may be extremely simple to pour in a little gas to get the motor running, but with electric fishing' 'angling trolling outboard it does not work that way. Electric fishing trolling outboard must be charged. They require a battery charger. This can be an onboard piece or a piece that is kept on shore. That is up to the individual fisherman. The batteries are made to be run down and charged often so there is no concern over ruining them. However, the manufactures directions should be followed to ensure the motor batteries are not ruined.
- Always check the motor out before use. Stray fishing lines can easily tangle in the motor and cause major damage. It only takes a brief moment for the damage to be done, but it also only takes a brief moment to look over the engine to prevent that from happening.
- Do everyday maintenance. Like any type of motor an electric motor requires checks and routine maintenance. Parts should be checked to make sure they are secure and in good shape. Fisherman should not assume that electric means no worries. Maintenance is still important.
- The motor should always be supervised when charging. This prevents it from getting turned on accidentally. A motor that is left running can easily overheat and burn out.
- Be friendly to the motor. Electric fishing trolling outboard have parts that are kept cool by being under water, so it is important that the fisherman does not run the motor out of the water. It is also important to keep general care in mind by not using the motor is weeds or mud.
These tips offer ways to prolong the life of and protect the electric fishing trolling outboard. Fisherman who are using an fishing trolling outboard will benefit greatly from following these tips and any instructions offered by the manufacturer.
Monday, September 28, 2009
Wednesday, September 23, 2009
Electric Fishing trolling Outboard Tips
Electric Fishing trolling Outboard Tips
One of the most useful pieces of equipment on any boat is an electric fishing trolling outboard. Although they can be used to troll with, their main purpose is for boat positioning, or for working structure.
Size
When looking to buy an electric fishing trolling outboard, there are a couple of things to consider. The first of which is size/power. You will want to ensure that your electric fishing trolling outboard is not undersized... oversized in this case would be better.
Keep in mind that fiberglass boats are heavier than aluminium. Therefore on a typical 17' ½ foot fibreglass boat, an electric fishing trolling outboard with 60 lbs of thrust (or more) would be ideal - but for a 17' ½ foot aluminum boat, 50 lbs of thrust (or more) would do.
Some other factors to consider when deciding on which size electric fishing trolling outboard would be best, would be to consider the type of fishing' 'angling you will be doing. If you are using your fishing trolling outboard in river conditions with heavy current - or in tidal conditions or heavy wind conditions, you will want a strong fishing trolling outboard in order to fight the current.
Shaft Length
Another very important feature to consider is the length of your shaft on your electric fishing trolling outboard. If your shaft length is to short, as soon as you coming upon some wind and wavy conditions, your prop will be constantly bouncing in and out of the water, with each wave. (assuming your electric motor is a bow mount)
Not only is this bad for your fishing trolling motor (i.e. it is not recommended that your electric motor be operated out of eater) but you will also be loosing boat control. An fishing trolling outboard with a longer shaft may be more cumbersome to lift & retrieve, but it sure does have many rewards.
How high the bow of your boat will be above water, must also be taken into account. The bow of a bass boat will sit very close to the water, so a shorter shaft size on your fishing trolling outboard may be o.k. Where as a "deep V" boat, like a walleye boat, will sit higher on the water and a long shafted electric fishing trolling outboard is almost crucial.
Power
If you have a choice between a 24 volt and 12 volt electric fishing trolling outboard, the edge should always go to the 24 volt model. The difference between the 2 models is that the 12 volt model will use 1 deep cycle battery, whereas the 24 volt model will use 2 deep cycle batteries.
The biggest advantage of a 24 volt electric fishing trolling outboard besides offering more power, is the simple fact that it will last at least twice as long. There's nothing more frustrating than running out of electric power half way through your day of fishing... especially if you are fishing a tournament!
Until next time, good fortune and good fishing!
One of the most useful pieces of equipment on any boat is an electric fishing trolling outboard. Although they can be used to troll with, their main purpose is for boat positioning, or for working structure.
Size
When looking to buy an electric fishing trolling outboard, there are a couple of things to consider. The first of which is size/power. You will want to ensure that your electric fishing trolling outboard is not undersized... oversized in this case would be better.
Keep in mind that fiberglass boats are heavier than aluminium. Therefore on a typical 17' ½ foot fibreglass boat, an electric fishing trolling outboard with 60 lbs of thrust (or more) would be ideal - but for a 17' ½ foot aluminum boat, 50 lbs of thrust (or more) would do.
Some other factors to consider when deciding on which size electric fishing trolling outboard would be best, would be to consider the type of fishing' 'angling you will be doing. If you are using your fishing trolling outboard in river conditions with heavy current - or in tidal conditions or heavy wind conditions, you will want a strong fishing trolling outboard in order to fight the current.
Shaft Length
Another very important feature to consider is the length of your shaft on your electric fishing trolling outboard. If your shaft length is to short, as soon as you coming upon some wind and wavy conditions, your prop will be constantly bouncing in and out of the water, with each wave. (assuming your electric motor is a bow mount)
Not only is this bad for your fishing trolling motor (i.e. it is not recommended that your electric motor be operated out of eater) but you will also be loosing boat control. An fishing trolling outboard with a longer shaft may be more cumbersome to lift & retrieve, but it sure does have many rewards.
How high the bow of your boat will be above water, must also be taken into account. The bow of a bass boat will sit very close to the water, so a shorter shaft size on your fishing trolling outboard may be o.k. Where as a "deep V" boat, like a walleye boat, will sit higher on the water and a long shafted electric fishing trolling outboard is almost crucial.
Power
If you have a choice between a 24 volt and 12 volt electric fishing trolling outboard, the edge should always go to the 24 volt model. The difference between the 2 models is that the 12 volt model will use 1 deep cycle battery, whereas the 24 volt model will use 2 deep cycle batteries.
The biggest advantage of a 24 volt electric fishing trolling outboard besides offering more power, is the simple fact that it will last at least twice as long. There's nothing more frustrating than running out of electric power half way through your day of fishing... especially if you are fishing a tournament!
Until next time, good fortune and good fishing!
Friday, September 18, 2009
How to Wire a Trolling Outboard Motor
How to Wire a Trolling Outboard Motor
1.
Step 1
Cut a piece of red 10 gauge wire long enough to reach from the battery to the trolling outboard.
2.
Step 2
Crimp a solderless ring connector to one end of this wire. Select a connector that will fit over the studs of the circuit breaker.
3.
Step 3
Cut a 6-inch piece of red 10 gauge wire. Crimp solderless ring connectors to both ends. One end should fit over the circuit breaker stud; the other ring will need to be large enough to fit over the positive stud on the deep cycle battery.
4.
Step 4
Connect the red wires to the circuit breaker and the positive terminal of the battery
5.
Step 5
Splice this long red wire to the red wire of the trolling outboard with a solderless butt connector, or use a trolling outboard plug and receptacle. Tape this connection securely, or use heat shrink tubing to protect it.
6.
Step 6
Splice the black 10 gauge wire to the black wire of the trolling outboard with a solderless butt connector. Tape this connection securely, or use heat shrink tubing to protect it.
7.
Step 7
Crimp a large solderless ring connector on the other end of the black 10 gauge wire. Connect it to the negative terminal of the deep cycle battery.
1.
Step 1
Cut a piece of red 10 gauge wire long enough to reach from the battery to the trolling outboard.
2.
Step 2
Crimp a solderless ring connector to one end of this wire. Select a connector that will fit over the studs of the circuit breaker.
3.
Step 3
Cut a 6-inch piece of red 10 gauge wire. Crimp solderless ring connectors to both ends. One end should fit over the circuit breaker stud; the other ring will need to be large enough to fit over the positive stud on the deep cycle battery.
4.
Step 4
Connect the red wires to the circuit breaker and the positive terminal of the battery
5.
Step 5
Splice this long red wire to the red wire of the trolling outboard with a solderless butt connector, or use a trolling outboard plug and receptacle. Tape this connection securely, or use heat shrink tubing to protect it.
6.
Step 6
Splice the black 10 gauge wire to the black wire of the trolling outboard with a solderless butt connector. Tape this connection securely, or use heat shrink tubing to protect it.
7.
Step 7
Crimp a large solderless ring connector on the other end of the black 10 gauge wire. Connect it to the negative terminal of the deep cycle battery.
Tuesday, September 15, 2009
Tips About Electric Trolling Outboards.
Tips About Electric Trolling Outboards.
Electric trolling outboards are being found more and more often onboard many fishing boats. Boaters are discovering the many benefits electric motors have to offer. Most notable the fact they operate in silence and that they are environmentally friendly. In addition, their popularity is not hurt by the rise in gas prices. These motors do require care that is different from the average gasoline powered motors.
Electric motors operate differently than gas motors, so it is no surprise that they need different care. Electric motors use batteries to supply them with power. This means they have a whole different way of powering up. Any fisherman that has or is buying an electric trolling outboard needs to check out the follow list of tips.
- Charging replaces filling with fuel. It may be extremely simple to pour in a little gas to get the motor running, but with electric trolling outboard it does not work that way. Electric trolling outboard must be charged. They require a battery charger. This can be an onboard piece or a piece that is kept on shore. That is up to the individual fisherman. The batteries are made to be run down and charged often so there is no concern over ruining them. However, the manufactures directions should be followed to ensure the motor batteries are not ruined.
- Always check the motor out before use. Stray fishing lines can easily tangle in the motor and cause major damage. It only takes a brief moment for the damage to be done, but it also only takes a brief moment to look over the engine to prevent that from happening.
- Do routine maintenance. Like any type of motor an electric motor requires checks and routine maintenance. Parts should be checked to make sure they are secure and in good shape. Fisherman should not assume that electric means no worries. Maintenance is still important.
- The motor should always be monitored when charging. This prevents it from getting turned on accidentally. A motor that is left running can easily overheat and burn out.
- Be friendly to the motor. Electric trolling outboards have parts that are kept cool by being under water, so it is important that the fisherman does not run the motor out of the water. It is also important to keep general care in mind by not using the motor is weeds or mud.
These tips offer ways to prolong the life of and protect the electric trolling outboard. Fisherman who are using an electric motor will benefit greatly from following these tips and any instructions offered by the manufacturer.
Electric trolling outboards are being found more and more often onboard many fishing boats. Boaters are discovering the many benefits electric motors have to offer. Most notable the fact they operate in silence and that they are environmentally friendly. In addition, their popularity is not hurt by the rise in gas prices. These motors do require care that is different from the average gasoline powered motors.
Electric motors operate differently than gas motors, so it is no surprise that they need different care. Electric motors use batteries to supply them with power. This means they have a whole different way of powering up. Any fisherman that has or is buying an electric trolling outboard needs to check out the follow list of tips.
- Charging replaces filling with fuel. It may be extremely simple to pour in a little gas to get the motor running, but with electric trolling outboard it does not work that way. Electric trolling outboard must be charged. They require a battery charger. This can be an onboard piece or a piece that is kept on shore. That is up to the individual fisherman. The batteries are made to be run down and charged often so there is no concern over ruining them. However, the manufactures directions should be followed to ensure the motor batteries are not ruined.
- Always check the motor out before use. Stray fishing lines can easily tangle in the motor and cause major damage. It only takes a brief moment for the damage to be done, but it also only takes a brief moment to look over the engine to prevent that from happening.
- Do routine maintenance. Like any type of motor an electric motor requires checks and routine maintenance. Parts should be checked to make sure they are secure and in good shape. Fisherman should not assume that electric means no worries. Maintenance is still important.
- The motor should always be monitored when charging. This prevents it from getting turned on accidentally. A motor that is left running can easily overheat and burn out.
- Be friendly to the motor. Electric trolling outboards have parts that are kept cool by being under water, so it is important that the fisherman does not run the motor out of the water. It is also important to keep general care in mind by not using the motor is weeds or mud.
These tips offer ways to prolong the life of and protect the electric trolling outboard. Fisherman who are using an electric motor will benefit greatly from following these tips and any instructions offered by the manufacturer.
Sunday, September 13, 2009
How to Choose Used Trolling Outboard Motors
How to Choose Used Trolling Outboard Motors
Once you have a boat, you'll need a motor to get you out to that great fishing spot. Looking for a good used motor? Look no further. A few simple decisions and you are on your way. Here are just a few things to keep in mind when buying a used trolling outboard motor.
When buying used, the best thing to do is look for quality name brand; Evinrude, Yamaha, Mercury, and Honda, for example. It is actually better to purchase a more popular brand because they are usually the best quality and come with the best warranties. Check out Consumer Reports for trolling outboard motors. Read consumer's reviews on Yahoo Shopping. Look around and ask people what they have and why. When you have the whole picture, you are ready to choose your next used trolling outboard motor.
Look at the different accessories you may choose. Some have hydraulic tilt, cable steering, and electric start, all of which simplify using the motor, while others have a pull rope start and a tiller handle for steering and throttle control. Because of these factors, no one piece of advice or article can cover all the possibilities. If you already have the boat, however, you need the compatible motor to your setup. In other words, if you have a steering wheel, or stick type steering system, you will want to buy a motor with a steering cable attachment, and if you have a battery and wiring to an ignition system you will want electric start. On the other hand, if you do not have these features in your boat, it is not practical to buy a motor that uses them.
Next, consider age. Age and use are not always synonymous. A used motor can be older, and still have had relatively little use. It is hours run that matters with a boat, and not miles on an odometer as in a car. Anything over 500 hours run will generally mean more maintenance. As a rule of thumb, look for a motor with the fewer hours run. This is the safest economical practice.
Buying a boat, complete with motor, often ends up costing more. If you find a boat, new or used, then choose wisely on a used motor, you are saving money, since in many cases, it is the new motor you are paying the most for on a boat bought complete. Remember that age does not equal quality. There are some fantastic used motors out there that have had little use. Depreciation on a motor occurs most rapidly in the first year, but that doesn't mean the quality of the motor is any less.
The same principle applies to having a boat that has need of a "new" motor. Choosing a used quality motor is going to be much cheaper than buying new, and in most cases, just as practical. By doing just a little homework you can decide which used trolling outboard motors are best for you. Having an economical used trolling outboard motor does not have to compromise quality.
Once you have a boat, you'll need a motor to get you out to that great fishing spot. Looking for a good used motor? Look no further. A few simple decisions and you are on your way. Here are just a few things to keep in mind when buying a used trolling outboard motor.
When buying used, the best thing to do is look for quality name brand; Evinrude, Yamaha, Mercury, and Honda, for example. It is actually better to purchase a more popular brand because they are usually the best quality and come with the best warranties. Check out Consumer Reports for trolling outboard motors. Read consumer's reviews on Yahoo Shopping. Look around and ask people what they have and why. When you have the whole picture, you are ready to choose your next used trolling outboard motor.
Look at the different accessories you may choose. Some have hydraulic tilt, cable steering, and electric start, all of which simplify using the motor, while others have a pull rope start and a tiller handle for steering and throttle control. Because of these factors, no one piece of advice or article can cover all the possibilities. If you already have the boat, however, you need the compatible motor to your setup. In other words, if you have a steering wheel, or stick type steering system, you will want to buy a motor with a steering cable attachment, and if you have a battery and wiring to an ignition system you will want electric start. On the other hand, if you do not have these features in your boat, it is not practical to buy a motor that uses them.
Next, consider age. Age and use are not always synonymous. A used motor can be older, and still have had relatively little use. It is hours run that matters with a boat, and not miles on an odometer as in a car. Anything over 500 hours run will generally mean more maintenance. As a rule of thumb, look for a motor with the fewer hours run. This is the safest economical practice.
Buying a boat, complete with motor, often ends up costing more. If you find a boat, new or used, then choose wisely on a used motor, you are saving money, since in many cases, it is the new motor you are paying the most for on a boat bought complete. Remember that age does not equal quality. There are some fantastic used motors out there that have had little use. Depreciation on a motor occurs most rapidly in the first year, but that doesn't mean the quality of the motor is any less.
The same principle applies to having a boat that has need of a "new" motor. Choosing a used quality motor is going to be much cheaper than buying new, and in most cases, just as practical. By doing just a little homework you can decide which used trolling outboard motors are best for you. Having an economical used trolling outboard motor does not have to compromise quality.
Thursday, September 10, 2009
Small Trolling Outboard Engines
Small Trolling Outboard Engines
If you can accept that electric trolling outboard will limit your range and speed, and you want to troll quietly, then it might well be the option for you. If you rely on your engine to stem the tide, you should stick to your petrol engine for a while longer.
What to look for - Twist-grip tiller throttle - look out for good labelling and robust construction. Friction control - should be tight enough to leave the engine to steer itself. Stop button and kill cord - it's possible for the lanyard to get tangled up when you spin the engine. Mounting bracket - must have a nut or nut wing, or a captive pin. Screw clamps - look for loops in the end of the screw clamp handles. These can be padlocked to deter from theft. Carrying handle - designed to carry the engine comfortably. Fuel cap and tank breather - the cap should be easy to remove. Gear leaver - small outboard engines have no reverse so the leaver selects neutral or forward. Oil sight gauge - this is vital. If oil leaks out, most sumps only take a mug full of oil. Fuel tap - check for clear labelling. Tilt mechanism - some models have multiple tilt positions.
Electric trolling outboards - Electric trolling outboards may well be the future. They're quiet, environmentally friendly and compact. But most require a heavy battery which will limit your range. Electric trolling outboards are traditionally used for trolling - designed to move a heavy boat at a low speed with the main engine switched off, often used by American lake fishermen.
In use, electric engines are environmentally friendly. Buy how do they recharge? The environmental advantage is lost if you have to run the engine for hours to recharge the battery. The solution could be shore power. If you are visiting marinas a lot, you can charge the batteries when you berth. Or you could buy a spare battery and keep it charged.
You could also think about using one of your boat's domestic batteries, but there is the risk of compromising power here. You might think about buying an extra domestic battery and interchanging it with one in your battery bank - so there is always one on charge and one in use.
Why not trickle charge your battery with a wind turbine or solar panel? Ideally you would have two batteries - one charging and the other in use.
Top 3 Electric tips - 1. When you motor with the engine on maximum, it will draw a large current. By reducing the speed by half a notch, the current will be halved without compromising speed too much.
2. Unlike petrol outboards where a leg is a fixed length, electric outboard's height is adjustable. Trim it so the leg is at right angles to the water to improve efficiency.
3. Use wing nut battery terminals to clamp and release the power cables, without the use of a spanner. Crocodile clips are another option, but they can be easily knocked off.
If you can accept that electric trolling outboards will limit your range and speed, and you want to troll quietly, then it might well be the option for you. If you rely on your engine to stem the tide, you should stick to your petrol engine for a while longer.
If you can accept that electric trolling outboard will limit your range and speed, and you want to troll quietly, then it might well be the option for you. If you rely on your engine to stem the tide, you should stick to your petrol engine for a while longer.
What to look for - Twist-grip tiller throttle - look out for good labelling and robust construction. Friction control - should be tight enough to leave the engine to steer itself. Stop button and kill cord - it's possible for the lanyard to get tangled up when you spin the engine. Mounting bracket - must have a nut or nut wing, or a captive pin. Screw clamps - look for loops in the end of the screw clamp handles. These can be padlocked to deter from theft. Carrying handle - designed to carry the engine comfortably. Fuel cap and tank breather - the cap should be easy to remove. Gear leaver - small outboard engines have no reverse so the leaver selects neutral or forward. Oil sight gauge - this is vital. If oil leaks out, most sumps only take a mug full of oil. Fuel tap - check for clear labelling. Tilt mechanism - some models have multiple tilt positions.
Electric trolling outboards - Electric trolling outboards may well be the future. They're quiet, environmentally friendly and compact. But most require a heavy battery which will limit your range. Electric trolling outboards are traditionally used for trolling - designed to move a heavy boat at a low speed with the main engine switched off, often used by American lake fishermen.
In use, electric engines are environmentally friendly. Buy how do they recharge? The environmental advantage is lost if you have to run the engine for hours to recharge the battery. The solution could be shore power. If you are visiting marinas a lot, you can charge the batteries when you berth. Or you could buy a spare battery and keep it charged.
You could also think about using one of your boat's domestic batteries, but there is the risk of compromising power here. You might think about buying an extra domestic battery and interchanging it with one in your battery bank - so there is always one on charge and one in use.
Why not trickle charge your battery with a wind turbine or solar panel? Ideally you would have two batteries - one charging and the other in use.
Top 3 Electric tips - 1. When you motor with the engine on maximum, it will draw a large current. By reducing the speed by half a notch, the current will be halved without compromising speed too much.
2. Unlike petrol outboards where a leg is a fixed length, electric outboard's height is adjustable. Trim it so the leg is at right angles to the water to improve efficiency.
3. Use wing nut battery terminals to clamp and release the power cables, without the use of a spanner. Crocodile clips are another option, but they can be easily knocked off.
If you can accept that electric trolling outboards will limit your range and speed, and you want to troll quietly, then it might well be the option for you. If you rely on your engine to stem the tide, you should stick to your petrol engine for a while longer.
Monday, September 7, 2009
Trolling Outboard
Welcome to our Trolling Outboard fishing blog.
If your looking for information about Trolling Outboard fishing then this site is for you.
We will have Trolling Outboard articles and Trolling Outboard information posted here.
If your looking for information about Trolling Outboard fishing then this site is for you.
We will have Trolling Outboard articles and Trolling Outboard information posted here.
Subscribe to:
Posts (Atom)